Guangdong Dawin Intelligent Equipment Co.,Ltd.
Contact Person: Mr. Liu
Cell phone number: +86 139-2247-7849
Tel:
E-mail:
Website: ggdali.com
Address: Dawin Intelligent Equipment
Technology Park,Lianhe Road,Xiagang,
Chang'an Town,Dongguan City
Mechanical features:
• The optimal bed structure is designed to withstand the inertia generated by high G. It is rock solid and stable.
• The castings are treated with secondary tempering and long time natural aging treatment to ensure the stability of the castings and not easy to deform.
• Strictly in accordance with the Japanese assembly process standards, in pursuit of higher mechanical precision.
• Strictly in accordance with the Japanese assembly process standards, in pursuit of higher mechanical precision.
• Three-axis precision ball screws with small pitches are used to ensure high dynamic responsiveness.
•Standard with fully enclosed tool magazine, high stability tool changer system, fast tool change speed and higher stability.
• Adopting reasonable chip removal mechanism, it is convenient to clean up the waste chips and not easy to leak oil.
• Customised spindles for different machining requirements.
| Machine Specification | Unit | W12 |
型程 | ||
X轴行程安排 | mm | 1200 |
Y轴旅程 | mm | 700 |
Z轴旅程 | mm | 600 |
主轴端至工作台面 | mm | 150-750 |
主轴的咨询中心至立柱滑道面间隔 | mm | 800 |
导轨尺寸 | ||
X轴导轨跨距/净宽 | mm | Box ways |
Y轴滑槽跨距/高度 | mm | Box ways |
Z轴阻尼滑轨跨距/大小 | mm | Box ways |
丝杠尽寸 | ||
X/Y/Z 丝杆长宽 | mm | Φ50 |
螺距 | mm | 10 |
工作台 | ||
工作台尺寸 | mm | 1360*700 |
T型槽宽（宽*槽数*安全距离） | mm | 22*5*140 |
工作台最大载重量 | kgs | 1300 |
主轴 | ||
CNC主轴较高带速 | rpm | 6000 |
设备的主轴形式 | type | Gear Box spindle |
设备主轴马力 | kw | 18.5 |
X/Y/Z 轴伺服控制器电机 | kw | 4.5/4.5/4.5 |
主轴端孔斜度 | type | BT50 |
主轴前端轴承 | mm | 90 |
进给速度 | ||
快速位移（X/Y/Z轴） | m/min | 15/15/16 |
切削位移速度 | m/min | 1-10 |
ATC | ||
ATC Type | Arm type | |
Tool capaticy | pcs | 24 |
Max. tool weight | kgs | 15 |
Max. knife length | mm | 300 |
Max. tool diameter | mm | 110/220 |
Recipocating time/tool change time | sec | 2.5 |
MISCEL LANEOUS | ||
Air source | kgs/cm2 | 6 |
Occupied space(LxWxH) | mm | 4850/3470/3550 |
Machine weight | kgs | 12000 |
Spindle Coolant | Manual Handle Box | Air Blower for Spindle Nose | Oil Skimmer |
Arm Type Tool Changer | Heat Exchange in Control Box | Leveling Brock | Transformer |
BED Shower | Spindle air blast system | llluminating Lamp | Pneumatic Gun |
Automatic lubrication unit | Full splashguard | Three SignalL amp | Shower Gun |
Rigid tapping | Coolant Tank and Chip Bucket | Tool box | Operating instruction |
Automatic Tool Length Measurement | Automatic Tool Break detection | Belt-type Spindle BT40/8000rpm | Disk-type Oil Skimmer |
XYZ linear scale | Automatic Chip Conveyor | Direct Drive Spindle BBT40/1 5000rpm | Automatic Power - off (M30) |
Application of through- spindle | 4th axis NC rotary table | ZF Gear Box Spindle BT 50/6000rpm | Thermal Compensation |
Voltage Regulator | Oil Mist Collector | Built-in Spindle 24000/30000rpm |
Online Consultation